Blog

Keep normal on-off ball valves fully open during through-flushing unless the valve manual requires removal or another position. Remove large...

Use 2–5% for commissioning valve and actuator repair kits and 5–10% for two-year operating stock when no plant history is...

SPE is the better seat design for automatic cavity-pressure relief. DPE is the better seat design when pressure from either...

Most incomplete ball valve RFQs are missing the fluid composition, worst operating case, maximum opening and closing differential pressure, seat...

Direct answer: Reject any quotation that fails the required pressure-temperature rating, material compatibility, bore, cavity relief, end connection, safety qualification,...

Approve the GA and cross-section drawing with BOM before releasing project-specific machining or internal materials. Approve the actuator package before...

Accept the license only when four fields match: API 6D, Ball Valves, the actual manufacturing facility, and an Active status...

Install a cryogenic ball valve according to its valve-specific pressure direction, cavity-relief path, and permitted stem angle. On many unidirectional...

Carbon steel, 316L stainless steel, duplex stainless steel and nickel alloys can all work in amine-service ball valves, but under...