Blog

Industrial ball valves can handle pressures of up to 1,000 bar, but they require high operating torque and take up...

Industrial ball valves for oil and gas pipelines can withstand pressures of up to 10,000 PSI. The handle must be...

For highly corrosive media, 316L is recommended with a PTFE seat rated to 200°C. Check the operating pressure carefully. If...

Internal leakage in ball valves and seat wear are often caused by improper operation. To prevent this, the valve must...

When selecting a high-pressure ball valve, prioritize Class 1500 to Class 2500 pressure ratings. The body material should be forged...

Threaded ball valves are suitable for pipelines up to DN50. Installation is straightforward: wrap the threads with PTFE tape and...

Flanged ball valves in crude oil pipelines must be kept either fully open or fully closed. Throttling at a 45-degree...

In chemical service, flanged ball valves can handle pressures up to 16 MPa, use PFA lining for strong corrosion resistance,...

By tightening 4 to 8 flange bolts in a cross-pattern sequence and pairing them with a PTFE seal ring, the...